Iglavu yeNitrile yegumbi lokucoca, iSulphur ephantsi kunye neHalogen engenawo umgubo iKlasi 100, 1000
Inkcazo: Kutheni kufuneka sikhethe iiglavu zeHalogen ephantsi okanye ezikhululekileyo kunye neSulphur Nitrile ephantsi
Iiglavu zeNitrile ezifakwe iHalogen ezingenayo iSulphur Polymer engaphantsi zicwangciswe ngobuchule ukuze zihlangabezane nemigangatho ephezulu yococeko nokhuseleko, nto leyo ezenza zilungele amashishini ezithuthi zombane, iimoto kunye neendiza.
Ezi glavu zinciphisa ukuvezwa ziikhemikhali, ziqinisekisa ukuthembeka kwezinto ezibalulekileyo. Zenziwe ngononophelo ngeempawu zokusasazeka kwesulfure enye kwaye azinazo i-accelerator, ezi glavu zinciphisa kakhulu umngcipheko weempendulo ze-allergy kunye nokuthambekela kolusu, zinciphisa umngcipheko wokungcola ngelixa ziphucula intuthuzelo yomsebenzisi ngexesha lokunxiba ixesha elide.
Ukongeza, ezi glavu zinciphisa ngokufanelekileyo ungcoliseko kwiibhetri ukuthintela ukulahleka kokusebenza kakuhle kunye nokushisa kakhulu ngelixa zikhusela iindawo zombane ezibuthathaka ekuvezweni yi-halogen, ngaloo ndlela zigcina ukuthembeka kwenkqubo kwaye zithintele ukungasebenzi kakuhle okubiza kakhulu.
Ulwazi oluSiseko
| Igama leCandelo: | Iglavu yeNitrile ye-9＂ |
| Ubungakanani: | S/M/L |
| Izinto eziphathekayo: | I-100% yeLatex yeNitrile eyenziweyo |
| Inqanaba leMveliso: | Akukho Powder |
| Umbala | Luhlaza okanye Lumhlophe |
| Uhlobo lokupakisha | Iiglavu ezili-100 x Iziphakeli ezili-10/ibhokisi x Ibhokisi e-1 |
| Ukumelana nomphezulu | 10e6-10e10 |
| Imeko Yokugcina: Beka ubomi kwishelufa | Iiglavu mazigcine iimpawu zazo xa zigcinwe kwindawo eyomileyo. Kuphephe ukukhanya kwelanga ngqo. Iiglavu mazihlale ixesha elingaphezulu kweminyaka emi-2 ukususela kumhla wokwenziwa kwazo kunye nemeko yokugcina engentla. |
Ubukhulu
| Inkcazo | Ubungakanani | Umgangatho |
| Ubude (mm) | Zonke iisayizi | >=230mm |
|
Ububanzi besundu (mm) | S | 87 +/- 5 |
| M | 97 +/-5 | |
| L | 107 +/- 5 | |
| Ubukhulu (mm) * udonga olunye | Zonke iisayizi | Umnwe: 0.12+/-0.03 Isundu:0.09+/-0.03 Isandla: 0.08+/-0.03 |
| Ubunzima | S:4.0+/-0.3 M:4.5+/-0.3 L:5.0+/-0.03 |
Iimfuneko Zokusebenza
| Iimpawu | Inqanaba lokuhlola | I-AQL | Umgangatho weReferensi |
| Ubukhulu | S2 | 4.0 | I-ASTM D6319-10 |
| Iipropati Zomzimba | S2 | 4.0 | I-ASTM D6319-10 |
| Inkululeko kwiMingxunya (Uvavanyo lwePompo yoMoya) | GI | 1.5 | Ukuziqhelanisa ngaphakathi |
Kutheni Ukhetha Thina:
1. Akukho Sulphur iphantsi kunye neHalogen
2. I-Ambidextrous, Iminwe Enemisonto, I-Beaded Cuff
3. Isitokhwe esaneleyo, ukuhanjiswa kwekhabhathi ngokukhawuleza
3. Isebenza iiyure ezi-7 * ezingama-24 kwaye inkonzo ilungile
4. Ishishini loMbane (Izithuthi zoMbane, Ukuveliswa kwee-EV, Ishishini leeMoto, Ishishini leeNqwelo-moya)